What are the maintenance methods of vacuum laminating machine?
Laminating machine can be divided into two categories, coating type laminating machine and pre coating laminating machine, both of which have different characteristics, coating type laminating machine including glue, drying, hot pressing three part, wide application range, stable processing performance, is the application of coating equipment widely, and pre coated type coating film machine no glue and drying part, has the advantages of small volume, low cost, flexible and convenient operation. But no matter what kind of laminating machine, in order to ensure its effectiveness, are the need for maintenance, and below, let Xiao Bian to introduce its maintenance methods.
1, the machine into a clean, especially the head part heating roller and the rubber roller and the tail part of the glue and scraping roller, roller surface must clean the machine, if it is found that the surface of the roller is to wipe off the oil stains or scratch, to remove the grinding.
2, regularly add lubricating oil, especially pay attention to both ends of the heating roller bearing lubrication, as well as reducer lubrication, in order to ensure that the machine is in good lubrication condition.
3, parts of the connecting bolts should be checked regularly, to ensure good connection.
4, the fuselage grounding must be safe and reliable, in order to prevent electric shock.
5, four major checks in six months.
The above is the vacuum laminating machine maintenance method of simple introduction, if you have any questions, may wish to inquire, our company will serve you wholeheartedly!
