Welcome Foshan District of Shunde City Jia Shun Machinery Co. Ltd. Website!Main products:PUR Veneer Machine,PUR Flat Machine,Wooden door transfer machine,Positive and negative laminating machine
Phone:0757-27835567
 CONTACT US

CompanyName:Foshan District of Shunde City Jia Shun Machinery Co. Ltd.

Linkman: Mr Zhang

Mobile:13902567009

Phone :0757-27835567

Fax :0757-22818359

Address:Guangdong province Foshan city Shunde District Lunjiao Chung Hei Road No. 1 five Wei

Zip :528308

HomePage:http://www.gdjsljx.com/en/

Email :jsl8998@163.com

Industry information
current location:Foshan District of Shunde City Jia Shun Machinery Co. Ltd. >> News >> Industry information >> ​Introduction of vacuum laminator

Application and common troubleshooting of vacuum film coating machine


Application and common troubleshooting of vacuum film coating machine
Film is a plastic film coated with adhesive, and the paper for the substrate printed by rubber roller and the heating roller pressure close together, one form of paper and plastic products. After printing film, the plastic film surface with a thin layer of transparent, surface smooth and light, not only improves the print gloss and fastness, prolong the service life of printed products, while plastic film plays waterproof, wear resistance, folding resistance, chemical corrosion protection etc..
A good vacuum laminating machine, bronzing machine not only requires indentation operation, maintenance is equally important, we strictly follow the machine operation and maintenance regulations, develop a good habit of using this machine, so as to prolong the life of machine.
Troubleshooting of automatic vacuum film coating machine:
First, the machine does not start: the input line is blocked, the power line is connected, the voltage is not enough.
Two, temperature measurement is inaccurate: thermocouple, temperature controller. Is the installation incorrect and damaged?.
Three, the vacuum does not come: gas road closed, hand valve or solenoid valve is not closed, vacuum pumps, motor belts loose, vacuum table damage.
Four, the main power switch trip: heating box top input wire leakage, distribution box leakage, the external wire on the equipment, motor leakage, etc.. Gilding press.

 
Application and common troubleshooting of vacuum film coating machine
Five, place: vacuum suction membrane leakage, temperature is not enough, not enough, film is too thin, the workpiece with other materials, the workpiece is deeper than concave membrane pulled, adsorb the time is too short, the film does not move too close to the workpiece.
Six, the surface of the workpiece is folded and not smooth or angular package: the film is not straightened, the film quality is not good, the workpiece is not polished well, glue spray too much, the workpiece under the touch plate is too low.
Seven, did not smoke when the film down to pull up: solenoid valve or hand valve is open?.
Eight, play break phenomenon: temperature is too high, heating time is too long, the film quality is not good, no heating.
Foshan District of Shunde City Jia Shun Machinery Co. Ltd. is a company specializing in the design and manufacture of woodworking machinery, mainly engaged in the production of PUR veneer, PUR flat machine, PUR machine of wood veneer, wood veneer sheet transfer machine, machine, positive and negative pressure vacuum laminating machine such as veneer machine manufacturer. Telephone: 0757-27835567
Class: Industry information
Prev: What should be paid attention to before installing the positive and negative pressure negative film machine?
Next: ​Introduction of vacuum laminator

Article